The Space Station’s New 3-D Printer Recycles Old Plastic Into Custom Tools

By Korey Haynes | February 11, 2019 3:36 pm
a metallic box with wires

The Refabricator can recycle plastic and 3-D print it, all within a box the size of a mini fridge. (Credit: Allison Porter, Tethers Unlimited, Inc.)

Last week, Northrop Grumman’s Cygnus spacecraft departed the International Space Station, having delivered a batch of new experiments and cargo. Among them was the Refabricator, a new machine that will not only make objects on demand things for the astronauts, it will recycle them too.

While 3-D printers are becoming commonplace, nowhere are their benefits more obvious than in the confines of space. Cargo resupply missions to the ISS are routine, but as human spaceflight pushes farther out into deep space, there will be more pressure for self-sufficiency, as resupply missions become more difficult and expensive. That means not only manufacturing supplies, but also conserving and reusing the supplies on hand.

Re-use and Recycle

The Refabricator is in part a 3-D printer, allowing astronauts to make tools to their own specifications immediately, without waiting months for items to be flown from Earth. But there’s been a 3-D printer on the ISS since 2014. The Refabricator stands out because it’s able to recycle things it’s already printed and turn them into new materials.

3-d printed ratchet

A ratchet wrench 3-D printed aboard the ISS. (Credit: Made in Space)

It can even create the raw 3-D printer filament from old packing supplies, like the foam and plastic shipping materials NASA uses to pack its cargo for the trip to space. Most 3-D printers cannot reuse plastics once printed, because the way they print weakens the plastic’s integrity. But the Refabricator uses a different printing method, so that it can reprint the same material many times.

NASA hopes the new printer/recycler will both free up space on future resupply launches and reduce overall waste on the ISS. It could even lead to 3-D printers on Earth that one day use the items we normally put on the curb, like water bottles or plastic bags, to create brand new custom materials for our homes.

Tethers Unlimited, Inc. developed the Refabricator for NASA’s In-Space Manufacturing Office. Their whole creation fits into a cube about the size of a minifridge. The company can monitor the Refabricator from Earth, but astronauts on the ISS will perform the operations.

For this first test flight, that will mean having the Refabricator print, recycle, and re-print creations up to seven times in a loop, to prove that the material doesn’t weaken with repeated recycling. Those final printings will then be delivered back to Earth for testing – in particular, to see if and how the printing process differs in space from on the ground.

Check out the Refabricator in action with the NASA video below:

CATEGORIZED UNDER: Space & Physics, Technology, top posts
MORE ABOUT: space exploration
  • Uncle Al

    Where is the Green Agenda! Orbital Global Warming threatens to immolate the entire Earth and all its little children!

    … 1/3 the US freeze-burned.

    The only dialectically acceptable polymer is poly(lactide-co-glycolide) (PLGA) because it can be in part be manufactured from human milk. Saddle up, ladies! We’re passing legislation to save the Earth.

  • OWilson

    An obviously simple development.

    Plastic waste which is heavily processed, can be turned into a valuable asset!

    As human technology progresses, 3D printers could signal the end of waste plastic pollution, in much the same way as new mining and porcessing techniques are reaping rewards from old mining tailings and spills heaps.

    Maybe one day we will be opening up those underground processed nuclear waste storage sites to recover useful materials for the new technology. :)

    Human progess will not be denied!

  • Gayle

    I basically earn about $6,000-$8,000 every 30 days online. I lost my job after working for the same company for years, I needed reliable earnings, I was not thinking about the “get rich quick” home packages you see all over the internet. Those are all pyramid schemes or stuff where you have to sell to your friends and family. I actually required a reliable way to earn a living for me and my family. The greatest benefit of working on the net is that I am always home with the children and also enjoy time with family on different beaches of the world. All you have to do is fill out a very simple form to get front line access to the Home Profit System . You don’t need to be a computer whiz, but you should know how to use the net. If you can fill forms and surf web sites, you can do it very easily, You don’t need to sell anything at all and nobody needs to purchase anything.Here’s the right way to get started> IX2.CO/V73m


Discover's Newsletter

Sign up to get the latest science news delivered weekly right to your inbox!


See More

Collapse bottom bar