California’s dangerous Detwiler fire: The amazing GOES-16 satellite sees the blaze itself, not just the billowing smoke

By Tom Yulsman | July 21, 2017 1:25 pm

With its vastly improved capabilities, the new satellite has the potential to save the lives of firefighters

Hot spots and the massive smoke plume from California's Detwiler Fire are seen in this animation of imagery from the GOES-16 satellite acquired on July 18, 2017. (Source: RAMMB/CIRA)

Heat and the massive smoke plume from California’s Detwiler Fire are seen in this animation of visible and infrared imagery from the GOES-16 satellite acquired on July 18, 2017. (Source: RAMMB/CIRA)

For decades, satellites have been helping fire managers identify and monitor blazes, based on their smoke plumes and the hot spots they create in infrared imagery.

But as the animation above shows in spectacular fashion, the new GOES-16 weather satellite has taken things to a new level. With higher resolution imagery, and nearly real-time imaging capabilities, it is already helping forecasters improve their ability to predict wildfire behavior — which of course has the potential to save lives.

The animation shows California’s Detwiler Fire not far from Yosemite National Park on Wednesday, July 18th. It begins at 1 p.m. California time and runs through dusk. By that evening, the fire had grown to 45,000 acres, up from 20,000 the day before. And as I’m writing this on Friday morning, the fire has grown to 70,000 acres — about the size of Tampa, Florida. Fifty-eight homes have been destroyed, and with the fire just 15 percent contained, 1,500 structures remain threatened.

In the animation, the massive smoke plume is clearly visible. So is something that looks like flames. It’s not exactly that — you’re not seeing actual visual imagery of flames. Instead, you’re seeing heat emanating from the flames, detected by the sensor aboard GOES-16 in infrared wavelengths.

Overall, the animation consists of data acquired in a number of wavelengths of the electromagnetic radiation — ranging from the visible light that we see with our own eyes to different wavelengths of invisible infrared light. The result is a view that clearly reveals not just the Detwiler Fire’s smoke plume but also details about topography and vegetation on the ground, and information about the relative intensity of flames within burning areas. And all of this during the day and night.

To view active burning areas, the Advanced Baseline Imager on GOES-16 uses three spectral bands in the shortwave and near-infrared part of the electromagnetic spectrum. The red, yellow, and white colors seen in these active burn zones are indicative of the fire’s intensity, with white showing where it is hottest.

This wealth of data is also presented in greater spatial resolution than with the current generation of operational weather satellites. This includes the spacecraft GOES-16 will replace in November as the GOES-East satellite once it becomes officially operational. For example, in visible light, GOES-16 can see things as small as half a kilometer across, compared to 1 kilometer for the current generation of GOES satellites. That finer resolution almost gives GOES-16 the ability to spot the very largest container ships sailing the high seas. Almost, but not quite.

Plus, GOES-16 can scan an area as frequently as once every 30 seconds, providing nearly real-time views of a fire, as well as developing weather systems.

That rapid scanning is what provides the sense that we’re watching an actual movie of the Detwiler blaze — actual flames blossoming and spreading out while the smoke plume billows toward the northeast.

The bottom line, according to the National Oceanic and Atmospheric Administration, which manages the satellite:

GOES-16 scans the Earth and skies five times faster than NOAA’s current geostationary weather satellites, sending back sharper, more defined images at four times greater resolution as often as every 30 seconds, using three times the spectral channels as the previous model.

More frequent time-steps and greater spatial resolution help produce a far clearer picture of a wildfire’s movement, providing nuanced details that are just not visible in animations from previous satellites. This allows forecasters and fire managers to anticipate, not just react to, how a wildfire’s behavior might shift with the approach of a weather system. They can also see changes in a fire’s spread and intensity in time to give a warning to firefighters, even at night — before they might find themselves trapped or overrun by flames.

Returning to the Detwiler Fire itself, the timelapse above offers a spectacular view from the ground as day turned to dusk on July 18th.

And here are some additional views, from Twitter as well:

CATEGORIZED UNDER: Remote Sensing, select, Top Posts, Wildfire
ADVERTISEMENT
NEW ON DISCOVER
OPEN
CITIZEN SCIENCE
ADVERTISEMENT

ImaGeo

ImaGeo is a visual blog focusing on the intersection of imagery, imagination and Earth. It focuses on spectacular visuals related to the science of our planet, with an emphasis (although not an exclusive one) on the unfolding Anthropocene Epoch.

About Tom Yulsman

Tom Yulsman is Director of the Center for Environmental Journalism and a Professor of Journalism at the University of Colorado, Boulder. He also continues to work as a science and environmental journalist with more than 30 years of experience producing content for major publications. His work has appeared in the New York Times, Washington Post, Audubon, Climate Central, Columbia Journalism Review, Discover, Nieman Reports, and many other publications. He has held a variety of editorial positions over the years, including a stint as editor-in-chief of Earth magazine. Yulsman has written one book: Origins: the Quest for Our Cosmic Roots, published by the Institute of Physics in 2003.

ADVERTISEMENT

See More

ADVERTISEMENT

Discover's Newsletter

Sign up to get the latest science news delivered weekly right to your inbox!

Collapse bottom bar
+